Neat adder, but not essential

Instructions are lacking, so I added my own below. I agree with the others, strong fingers or a small pair of plyers for the ear loops. For the front logo, remove face shield screws then pull the liner back push the clip down to unlock it. Push the pins back though the shell, then swap out clear ""CCM" for colored logo, slide back into sshell holes and replace clipp

Good for growing players

Great item, no complaining. Things to keep in mind. The length of the stick grow the flex will go down and an 12" will decrease it plenty. Second tip I found. Use extra hot glue inside the shaft. Mildly pre heat the shaft, apply end into shaft. Flip upside down once tightly fitted. Apply more heat while inverted to allow the glue to flow and remove voids. Keep inverted until cool. Works every time....ps don't burn your stick...keep the heat gun at a distance and moving.

Neat adder, but not essential

Instructions are lacking, so I added my own below. I agree with the others, strong fingers or a small pair of plyers for the ear loops. For the front logo, remove face shield screws then pull the liner back push the clip down to unlock it. Push the pins back though the shell, then swap out clear ""CCM" for colored logo, slide back into sshell holes and replace clipp